- English
- Portugal
- العربية
- Français
- Indonesia
- İstanbul
- 대한민국
- Español

Home page

Cosmoprof Pick

Touch-Activated Vibrating Airless Eye Cream Tube | 5–30ml Capacity | Zinc Alloy Cooling Applicator with Electroplated PP Closure

Commodity name Touch-Activated Vibrating Airless Eye Cream Tube | 5–30ml Capacity | Zinc Alloy Cooling Applicator with Electroplated PP Closure
Commodity ID 810477-2
Lead Time: 20D
MOQ: 10000
Customized: color, size, finish, design
Suitable for: eye prododuct brands
Tube Diameter: 19mm
Filling Capacity: 5-30ml
Tube Material: ABL
Cap Type: screw cap w/ micro vibrator

Category：

You can send us an email：lissongroup@gzlisson.com

Top Materials Picks

Kraft Paper

Aluminum

Bioplastics

Sugarcane

PCR

Touch-Activated Vibrating Airless Eye Cream Tube | 5–30ml Capacity | Zinc Alloy Cooling Applicator with Electroplated PP Closure

600+ workers

15+ production bases

MOQ from 5,000 ONLY

BEAUTY ON YOUR TIME

The Vibration Engine

Component type: Encapsulated pager motor (similar to fitness tracker haptics)

Encapsulation material: Medical-grade silicone or epoxy – no exposed electronics

Activation method: Capacitive proximity sensor embedded under the applicator surface

Sensor sensitivity: Triggers at 0.5mm proximity (works through thin product residue)

Battery compartment: Hermetically sealed – replaceable via threaded bottom cap (CR927 or CR1025) or sealed non-replaceable for 200-cycle lifetime

Current draw: 80mA during vibration – approximately 2–3 hours of cumulative use per battery

The Electroplated PP Cap

Base material: Polypropylene (food-contact grade)

Why PP over ABS or PC? Better chemical resistance to skincare oils and emulsions, lower moisture absorption, more flexible threads (less cross-threading)

Plating process:

Surface activation (corona treatment)

Copper strike layer (adhesion)

Nickel layer (corrosion protection)

Final finish layer (chrome, gold, etc.)

Adhesion test: Cross-hatch tape pull – no visible removal

The Zinc Alloy Applicator Tip

Alloy composition: Zamak-3 (zinc, aluminum, magnesium, copper) – industry standard for decorative structural metal parts

Casting method: Hot chamber die casting – tight tolerances (±0.05mm)

Surface after casting: Tumble-finished to remove tooling lines, then polished

Why zinc? Higher density than aluminum (feels premium), better heat transfer than stainless steel (cools faster), and accepts plating more uniformly than brass

Skin contact profile: Rounded edges, no sharp corners, curved to fit the orbital bone

The Tube Body – Airless Layered Construction

Structure: Multi-layer laminate (EVOH barrier) or co-extruded plastic

Function: Collapses evenly as product is dispensed – no air enters, no product remains trapped

Opacity options: Transparent (see formula color), translucent (hint of contents), or fully opaque (for light-sensitive ingredients)

Seam quality: Zero burrs, flush bottom seal, no sharp edges on the crimp

The Airless Pump Mechanism (Inside the Neck)

Piston-driven vacuum system – not a dip tube

Output per stroke: Controllable via neck insert design (adjustable from 0.1ml to 0.3ml per pump)

Material: POM (acetal) for moving parts – self-lubricating, no metal-on-plastic wear

Priming: Requires 2–3 initial pumps, then consistent delivery to the last drop

For the End Consumer (Selling Ponts Your Brand Can Use)

Function	Consumer Benefit
Vibration on skin contact	No buttons to find. No on/off confusion. Works every time.
Cold metal tip	Wakes up tired eyes instantly. Reduces morning puffiness in 30 seconds.
Airless pump	Every drop of expensive serum is used. No cutting tubes open.
Silent motor	Can be used next to someone sleeping. No buzzing noise.
19mm diameter	Fits in a makeup bag, gym bag, or carry-on without bulging.

For Your Brand (Operational & Marketing Benefits)

Function	Brand Benefit
Single SKU = tube + tool	No separate massage accessory to produce or package.
Airless preservation	Formula lasts 18–24 months without excess preservatives. "Preservative-free" claim possible.
Refillable cartridge option	Subscription model ready. Lower environmental footprint.
Customizable vibration pattern	Can match vibration to product type (slow for retinol, fast for caffeine).
No visible electronics	Looks like a normal tube until used. Surprise and delight unboxing.

Parameter	Specification
Tube diameter	19mm ±0.2mm
Total height (30ml)	142mm ±1mm
Total height (15ml)	112mm ±1mm
Total height (5ml)	82mm ±1mm
Tube wall thickness	0.35mm – 0.45mm
Cap outer diameter	21mm
Cap height	38mm
Applicator tip length	18mm (exposed above cap when closed)
Applicator tip width	12mm at widest point
Net fill range	5ml / 10ml / 15ml / 20ml / 30ml
Pump output volume	0.15ml per full stroke (adjustable)
Airless evacuation rate	≥95% (≤5% residual)
Vibration frequency	100Hz – 120Hz (6,000 – 7,200 RPM)
Vibration amplitude	0.8mm – 1.2mm
Motor noise	<40dB at 10cm
Activation distance	0.5mm capacitive proximity
Battery type (replaceable)	CR927 – 3V lithium
Battery life	3–4 complete tube cycles
Operating temperature	0°C to 40°C
IP rating	IPX4 (splash resistant – not submersible)

Category	What You Can Change	Minimum Order for Change
Tube capacity	Any from 5ml to 30ml in 1ml increments	None (tooling family covers all)
Tube color	Any Pantone	10,000 units
Tube finish	Matte, gloss, soft-touch, frosted	10,000 units
Tube printing	Silk screen (1–4 colors), hot stamp, shrink sleeve	5,000 units
Cap plating color	Chrome, nickel, gold, rose gold, matte black, champagne	10,000 units
Cap plating texture	Mirror, brushed, sandblasted, PVD	10,000 units
Applicator shape	Minor modifications to curvature	20,000 units (new tooling)
Vibration pattern	Single speed, 2-speed, or pulse pattern	15,000 units (different motor driver)
Logo placement	Cap top (engraved), cap side (screen print), tube body, applicator side	5,000 units
Logo method	Laser engraving (metal), hot stamp (plastic), screen print, deboss	5,000 units
Packaging	White mailer box, custom print box, magnetic presentation box	10,000 units (custom print)

Every design decision supports the user's journey from opening to application.

Design Attribute	Expression
Silhouette	Tall, slender, cylindrical – fits alongside serums and droppers in a skincare routine
Color story	White or neutral tube body + metallic cap (chrome, gold, rose, gunmetal) – clean, ungendered, clinical
Texture contrast	Soft-touch or matte tube (grip) vs. high-shine plated cap (accent)
Proportion	Cap height is 1/3 of total length – balanced, not top-heavy
Visual weight	The metal applicator tip feels substantial without being heavy

What the end customer sees first:
A mirror-like cap that reflects light. Then a simple, unbroken tube surface. No visible buttons, no complex markings. The technology is hidden until use.