Cosmoprof Pick
Eye Cream Tube – Zinc Alloy Applicator | Plated PP Cap | 19mm Diameter | 5ml–30ml Capacity
- Commodity name Eye Cream Tube – Zinc Alloy Applicator | Plated PP Cap | 19mm Diameter | 5ml–30ml Capacity
- Commodity ID 810477-1
- Lead Time: 20D
- MOQ: 10000
- Customized: color, size, finish, applicator, wormanship, design, logo
- Suitable for: eye care brand
- Tube Diameter: 19mm Diameter
- Filling Capacity: 5ml–30ml Capacity
- Tube Material: PE
You can send us an email：lissongroup@gzlisson.com
Top Materials Picks
Kraft Paper
Aluminum
Bioplastics
Sugarcane
PCR
600+ workers
15+ production bases
MOQ from 5,000 ONLY
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
Customization
Minimum order quantities by configuration:
Customizable elements:
Tube body – color, matte or gloss finish, selected capacity (5ml to 30ml)
Cap plating – silver, gold, rose gold, or gunmetal
Applicator finish – polished, brushed, gold-plated, or rose gold-plated
Tube decoration – screen print, shrink sleeve, pressure-sensitive label, hot stamp
Secondary packaging – individual carton, display box, or bulk packing
Therapeutic benefits of zinc alloy applicator:
Puffiness reduction – cool metal constricts and reduces swelling on contact
Dark circle improvement – massage action stimulates local circulation
Fine line treatment – precise deposit prevents product waste and over-application
Sensitivity management – eliminates finger dragging, reducing mechanical irritation
Consumer storage recommendation:
Applicator provides cooling effect at room temperature
Enhanced cooling achieved by storing tube in refrigerator
Metal retains low temperature longer than plastic or fingers
Formula compatibility:
Medium-viscosity eye creams – fully compatible
Low-viscosity eye serums – compatible, test for thread leakage
Gel formulations – fully compatible
Oil-based treatments – fully compatible (PE is oil-resistant)
Water-based formulations – fully compatible
Compatibility limitations:
Not suitable for high-viscosity pastes – product will not flow through tube orifice
Avoid formulations with abrasive particles – may scratch applicator surface
Recommended pH range – 4.0 to 9.0
Finish Options
Tube body finishes:
Standard – natural white polyethylene, matte surface
Custom – any Pantone color
Custom surface – matte or gloss finish available
Cap plating finishes:
Silver plating – bright, reflective, classic, neutral positioning
Gold plating – warm, luxurious, anti-aging association
Rose gold plating – soft metallic, modern, feminine-leaning
Gunmetal plating – dark, cool, industrial, men's grooming orientation
Applicator finishes:
Polished – mirror-like surface, highly reflective
Brushed – fine linear texture, satin metallic appearance
Gold-plated – warm metallic tone
Rose gold-plated – soft pink metallic tone
Tube decoration methods:
Screen printing – up to 4 colors for logos and basic graphics
Shrink sleeve – full-coverage 360-degree artwork
Pressure-sensitive label – suitable for small batches or frequent design changes
Hot stamping – metallic foil accents
Finish quality standards:
No ghosting or mold flash on any component
No color mismatch between cap plating and applicator when matching specified
Plating and applicator finishes must complement or match per buyer requirements）
Competitive Positioning
Comparison with standard finger-application tube:
Standard tube has no applicator tool – LISSON tube includes zinc alloy tip
Standard tube provides no cooling effect – LISSON tube delivers natural cooling
Standard tube involves product contact with fingers – LISSON tube enables hygienic metal-only application
Standard tube offers imprecise deposit – LISSON tube provides precise deposit
Standard tube carries lower perceived value – LISSON tube commands higher perceived value
Standard tube has lower unit cost – LISSON tube costs 10% to 20% more
Comparison with plastic applicator tube:
Plastic applicator does not retain cooling temperature – zinc alloy stays cool
Plastic applicator carries lower perceived value – zinc alloy signals premium quality
Plastic surface may scratch over time – metal surface maintains smooth finish
Recommend Products
10 Production Bases for Your Cosmetic Packaging CUSTOMIZATION
1
Product conception
2
Product mould design
3
Mould making
4
Mould sample testing
5
Making samples
6
Mass production
CUSTOMIZE YOUR PACKAGING START FROM LISSON
Various mold types, integrated design and development.
Professional design team, integrated R&D.
Various free cosmetic packaging samples.
One-stop after-sales service to solve technical problems.
Contacts Us
E-mail: lissongroup@gzlisson.com
Wechat/WhatsApp: 008615099958531
Tel: +86-20-86889886
Postcode: 510800
