Cosmoprof Pick
LISSON 100ml PE Tube | Pearl Shape PP Cap | 35mm Diameter | 40–120ml Capacity
- Commodity name LISSON 100ml PE Tube | Pearl Shape PP Cap | 35mm Diameter | 40–120ml Capacity
- Commodity ID 810239
- Lead Time: 20D
- MOQ: 10000
- Customized: applicator, size, fillings, finish, design, artwork, color
- Sample: free
- Suitable for: hand cream, lotion, gel
- Tube Diameter: 35mm
- Filling Capacity: 40–120m
- Tube Material: PE
- Cap Type: round shape cap
Category：
You can send us an email：lissongroup@gzlisson.com
Top Materials Picks
Kraft Paper
Aluminum
Bioplastics
Sugarcane
PCR
600+ workers
15+ production bases
MOQ from 5,000 ONLY
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
Overview
The LISSON 100ml PE tube is a practical yet refined packaging solution for skincare and body care brands. At its core, this system combines a flexible polyethylene tube body with a distinctive pearl shape polypropylene cap. The 35mm diameter fits comfortably in hand, while the 100ml fill volume suits everything from daily body lotions to facial cleansers. The same tube tooling supports capacities from 40ml up to 120ml, making it easy to build product families. The pearl shape cap elevates the package beyond standard tubes — turning a functional container into something customers notice, touch, and remember.
Brand Visual
Quiet confidence. Soft curves. Repetition that builds recognition.
The LISSON PE tube stands upright with a clean, uninterrupted body. The pearl shape cap sits above like a polished stone — rounded, smooth, and deliberate. Brand copy appears in stacked repetition: "LISSON / SKIN CARE / LISSON / SKIN CARE" running vertically along the label area. Near the base, "Net: 100ml" anchors the size expectation.
Visual cues for photography:
Lighting: Soft, directional — one highlight across the pearl cap dome
Background: Neutral stone, raw linen, warm grey, or soft white
Framing: Single tube standing, cap slightly turned to show dome shape
Lifestyle: Tube resting beside a white towel or marble surface
Brand fit: Dermocosmetic lines, spa brands, giftable skincare, private-label prestige, and brands launching into Asia-Pacific markets where cap detailing signals quality.
Finish
| Component | Standard Finish | Options Available |
|---|---|---|
| Tube body | Natural white PE (matte) | Custom color PE, glossy finish |
| Pearl shape cap | High-gloss white or black | Custom Pantone, pearlized effect, matte, soft-touch |
| Cap accent | None | Foil stamping, embossed logo, colored top disk |
| Label surface | Smooth printable | Matte laminate, gloss laminate, soft-touch |
Visual Effect on Shelf
The pearl shape cap catches light differently from the tube body. If the tube is matte white and the cap is high-gloss white, the cap reads as a separate, precious object resting on top. If both are matching gloss, the package reads as one continuous form.
Recommended combination:
Matte tube + high-gloss pearl cap = maximum contrast and perceived value.
Viscosity Compatibility
| Viscosity | Suitable | Notes |
|---|---|---|
| Low (water-thin) | Yes | Use smaller orifice |
| Medium (lotions, gels) | Yes | Standard configuration |
| High (thick pastes) | Test first | May need larger orifice or wider shoulder |
Workmanship
Every LISSON tube and pearl shape cap is manufactured to consistent, repeatable standards suitable for automated filling lines and retail distribution.
Tube Body Quality
| Parameter | Standard |
|---|---|
| Wall thickness uniformity | ±0.05mm |
| Surface defects | None (no pinholes, no weld lines) |
| Shoulder transition | Smooth, no step or ridge |
| Base flatness | Stands without wobble (±0.5mm) |
Pearl Shape Cap Quality Standards
| Parameter | Requirement |
|---|---|
| Dome symmetry | Round, not oval or warped |
| Edge finish | Fully radiused, no sharp flash |
| Surface uniformity | Consistent gloss or matte across entire cap |
| Thread engagement | Smooth, no cross-threading |
| Liner seating | Flat, flush, no tilt |
| Visible molding marks | None on top dome (gate mark hidden inside rim) |
Quality checkpoints specific to pearl caps:
Caps are inspected for sink marks (common on thick domes)
Ejector pin marks are never visible on the outer surface
Each batch is tested for cap-to-tube color match when same color specified
Seal and Closure
| Parameter | Specification |
|---|---|
| Torque range | 2.0 – 3.5 Nm |
| Leak test pass rate | ≥99.9% (inverted, 48 hours) |
| Liner compatibility | Induction seal, foam liner, or linerless |
| Re-closure consistency | No torque degradation after 10 cycles |
Filling Line Compatibility
Runs on piston, peristaltic, and volumetric fillers
Recommended speed: 40–80 tubes per minute
Capping heads require soft grippers for pearl dome (standard)
Heat sealing: Foil or membrane seal before cap application
Highlights
| Feature | Benefit |
|---|---|
| 100ml fill | Standard size for body and face products |
| 35mm diameter | Comfortable grip, stable on shelf |
| PE tube body | Flexible, shatterproof, chemical-resistant |
| Pearl shape PP cap | Sculptural closure, premium handfeel |
| 40–120ml range | One tooling family for multiple SKUs |
| High-speed filling compatible | Runs on standard tube fillers |
| Label or direct print | Smooth PE surface accepts both |
| Pearl cap customization | Gloss, matte, pearlized, embossed logo |
Design
| Specification | Detail |
|---|---|
| Tube material | PE (Polyethylene) |
| Diameter | 35mm |
| Capacity range | 40ml – 120ml |
| Standard fill | 100ml |
| Cap material | PP (Polypropylene) |
| Cap style | Pearl shape (dome top, rounded profile) |
| Closure type | Screw cap |
| Tube shoulder | Standard or stepped |
The Pearl Shape Cap — In Detail
The pearl shape cap is a dome-like PP closure with a soft, rounded silhouette. Unlike flat caps or standard domes, this shape mimics the organic curve of a polished pearl.
| Feature | Description |
|---|---|
| Profile | Fully radiused top, no flat surfaces |
| Edges | Smooth, no sharp corners or molding flash |
| Height | Proportionate to 35mm tube width |
| Interior | Standard screw thread with liner seat |
| Grip | Smooth dome — opens easily due to height |
Why a pearl shape cap matters on shelf:
Shoppers notice the rounded form before reading the label
The cap creates a moment of tactile curiosity
It signals that someone thought about the packaging details
Recommend Products
10 Production Bases for Your Cosmetic Packaging CUSTOMIZATION
1
Product conception
2
Product mould design
3
Mould making
4
Mould sample testing
5
Making samples
6
Mass production
CUSTOMIZE YOUR PACKAGING START FROM LISSON
Various mold types, integrated design and development.
Professional design team, integrated R&D.
Various free cosmetic packaging samples.
One-stop after-sales service to solve technical problems.
Contacts Us
E-mail: lissongroup@gzlisson.com
Wechat/WhatsApp: 008615099958531
Tel: +86-20-86889886
Postcode: 510800
