Cosmoprof Pick
Transparent 30ml PETG Tube – Silver Plated Pump | 30mm Diameter
- Commodity name Transparent 30ml PETG Tube – Silver Plated Pump | 30mm Diameter
- Commodity ID XT0037001
- Lead Time: 20D
- MOQ: 10000
- Customized: color, finish, size, fillings, design, prints, workmanship, applicator
- Tube Diameter: 30mm
- Filling Capacity: 30ml
- Tube Material: petg
- Tube Decoration: clear
- Cap Type: screw cap
Category：
You can send us an email：lissongroup@gzlisson.com
Top Materials Picks
Kraft Paper
Aluminum
Bioplastics
Sugarcane
PCR
600+ workers
15+ production bases
MOQ from 5,000 ONLY
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
BEAUTY ON YOUR TIME
Overview
The LISSON 30ml PETG tube is a refined primary packaging solution for modern skincare and beauty formulations. Engineered around a 30mm diameter body and fitted with a silver plated PP pump, this system delivers precise, hygienic dispensing in a visually striking format. The transparent PETG body offers glass-like clarity without fragility, while the silver plated pump trim adds a cool, metallic signature. Suitable for serums, gels, facial oils, and targeted treatments.）
Application
Suitable formula types:
Low to medium viscosity (water-thin to light gel)
Serums (Vitamin C, hyaluronic acid, retinol, niacinamide)
Facial oils (squalane, rosehip, jojoba, camellia)
Eye treatments and spot correctors
Clear gels (aloe, antioxidant blends)
Beauty device primers
Brand Visual
Clean, composed, and quietly confident. The LISSON tube photographs as a seamless cylinder of light—transparent body, reflective silver pump, and matching PETG cap. The visual language avoids ornamentation in favor of material honesty.
Recommended visual treatment:
Backdrop: Neutral stone, raw linen, brushed aluminum, or tinted acrylic
Lighting: Soft directional (low contrast, silver reflections kept controlled)
Styling: Single tube standing, cap on or off, small drop of formula at pump outlet
Color palette: Silver, white, clear, soft grey, cool taupe
Brand fit: Clinical prestige, slow beauty, unisex skincare, travel-led lines, and clean beauty.
Highlights
30ml / 30mm – standard dose for 2–4 week regimens
PETG body – crystal clear, BPA-free, recyclable
PETG cap – visually seamless with tube
PP pump – chemically resistant, consistent output
Silver plated trim – premium handfeel, oxidation-resistant
≥95% evacuation rate – minimal product waste
Direct-to-shelf – no secondary carton required
Travel-friendly – lightweight and shatterproof
Workmanship
The LISSON tube is assembled with industrial precision across every interface.
Tube to pump seal: Tight compression fit with no lateral play. No leakage under standard transport or compression testing.
Silver plating application: Even, non-flaking deposition over pump exterior. No thinning at edges, no pooling in recesses. Plating adhesion tested for filling line handling and consumer use.
Threading and cap fit: PETG cap engages with clean tactile feedback. No cross-threading. Cap sits flush to tube shoulder when fully closed.
Pump assembly: PP internals move without grinding. Dip tube cut square, seated fully. Crimp ring uniform with no sharp protrusions.
Quality tolerance: <0.2mm visible mismatch between cap and tube diameter.
Compatibility:
pH range: 4.0 – 8.5
Alcohol tolerance: up to 20% ethanol (test seal integrity)
Avoid with: abrasive particles, crystallization-prone formulas, high-purity essential oils without compatibility testing
Pump performance:
Dosage per stroke: 0.2 – 0.3ml
Evacuation rate: ≥95%
Dip tube: calibrated for 30ml volume
Filling recommendations:
Method: piston or volumetric filler
Orientation: cap-down preferred for dip tube priming
Torque: 1.5 – 2.5 Nm
Sterilization: gamma or EtO (verify with PETG supplier)
Finish
| Component | Finish |
|---|---|
| Tube | High-gloss, crystal clear |
| Cap | High-gloss, matching clarity |
| Pump trim | Brushed-reflective silver plating |
| Overall effect | Cool metallic + transparent → layered, intentional |
Visual notes:
Tube allows full formula visibility (color, texture, air bubbles)
Silver pump reads as cold, clean, precision-oriented
No orange peel, clouding, or gloss mismatch
Surface hardness sufficient for screen printing or sleeving
Design
| Element | Specification |
|---|---|
| Capacity | 30ml |
| Diameter | 30mm |
| Tube material | PETG (clear, shatter-resistant) |
| Cap material | PETG (matches tube finish) |
| Pump material | PP (internal) |
| Pump trim | Silver plating (external) |
Design logic:
Continuous material language: tube + cap in matching PETG
Silver plating acts as the sole decorative accent
No unnecessary over-sleeves or outer cartons required
Pump stroke length and dip tube optimized for 30ml evacuation
Thread alignment designed for consistent high-speed capping
The result is packaging that feels integrated, not assembled.
Recommend Products
10 Production Bases for Your Cosmetic Packaging CUSTOMIZATION
1
Product conception
2
Product mould design
3
Mould making
4
Mould sample testing
5
Making samples
6
Mass production
CUSTOMIZE YOUR PACKAGING START FROM LISSON
Various mold types, integrated design and development.
Professional design team, integrated R&D.
Various free cosmetic packaging samples.
One-stop after-sales service to solve technical problems.
Contacts Us
E-mail: lissongroup@gzlisson.com
Wechat/WhatsApp: 008615099958531
Tel: +86-20-86889886
Postcode: 510800
